• 1.

    Touch and hold the Control line to turn Omnia on.

  • 2.

    Leave Omnia for 3 — 5 minutes, as it boots up and creates its own access point.

  • 3.

    On a laptop connected to the your network, click and access the network settings.

  • 4.

    Click the Omnia network.

  • 5.

    Click Connect. You will be connected to Omnia.

  • 6.

    Open a internet browser and type in 192.168.255.249 and press Enter.

  • 7.

    This will open the Omnia web based set up page, click Settings.

  • 8.

    To connect Omnia via Wi-Fi, click Wireless.

  • 9.

    Click Start Scan.

  • 10. Select the desired Wi-Fi network from the drop down menu.
  • 11.

    Enter the password and click OK.

  • 12.

    Omnia is now set up and ready to use, click OK.

  • 13.

    Once Omnia is connected to your network you can use the QR code in the Omnia Warranty booklet to access the web based set up page.

  • 14. After successful connection the IP address of Omnia will change (depending on your router). To find the new IP, we recommend downloading an Network analyzer app such as Scan LAN.