• 1.

    Before configuring Omnia via the web based set up pages, you will first need to have set up Omnia on your network.

    For more information see the Setup topics in this guide.
  • 2.

    Using the desired camera app on your smart device, scan the QR code in the Omnia Warranty booklet and follow the link generated. You will be forwarded to the web based setup page.

    For setup without a QR code see the My QR code is not working topic in Troubleshooting & FAQ's.

  • 3.

    To configure Omnia, click SETTINGS.

  • 4.

    Power sleep mode OFF — If set to OFF Omnia will go into standby after 30 minutes, but remain connected to the network.

  • 5.

    Power Sleep Timer ON — If set to ON Omnia will go into standby after 30 minutes, after 60 minutes Omnia will drop network connection and go into lower power (0.5W) mode.

  • 6.

    Startup Volume Limit OFF — If set to OFF the Omnia will start at the last set volume of playback.

  • 7.

    Startup Volume Limit ON — When set to ON and listening above 30% volume when Omnia goes into standby. When Omnia start next the volume will be set at 30%.

  • 8.

    Network Type — Choose the desired option to tell Omnia how you would like to connect to the network.

  • 9.

    Equalisation Settings — Crescendo™ — If set to ON Omnia will use the Crescendo™ spatial sound stage function to increase sound stage.

  • 10.

    Equalisation Settings — Loudness Maximizer — If set to ON Omnia will boost the bass at low volume levels.

  • 11.

    Room placement — If set to Near the wall Omnia will reduce the bass boost applied to playback.

  • 12.

    Room Placement — If set to Away from the wall Omnia will play using normal levels of bass boost.

  • 13.

    HDMI auto switching — If set to Always ON Omnia will automatically switch on and to HDMI input when the source device is switched on.

  • 14.

    HDMI auto switching — If set to Only on HDMI input Omnia will only switch automatically to HDMI input if this was the last selected input.