My QR code is not working
- 1.
Touch and hold the Control line to turn Omnia on.
- 2.
Leave Omnia for 3 — 5 minutes, as it boots up and creates its own access point.
- 3.
On a laptop connected to the your network, click and access the network settings.
- 4.
Click the Omnia network.
- 5.
Click Connect. You will be connected to Omnia.
- 6.
Open a internet browser and type in 192.168.255.249 and press Enter.
- 7.
This will open the Omnia web based set up page, click Settings.
- 8.
To connect Omnia via Wi-Fi, click Wireless.
- 9.
Click Start Scan.
- 10. Select the desired Wi-Fi network from the drop down menu.
- 11.
Enter the password and click OK.
- 12.
Omnia is now set up and ready to use, click OK.
- 13. After successful connection the IP address of Omnia will change (depending on your router). To find the new IP, we recommend downloading an Network analyzer app such as Scan LAN.