• 1.

    Locate the Analog port on the back of Omnia.

  • 2.

    Ensure the Analog selector is set to Phono.

    Use Phono for a turntable, use Line In for anything other type of analogue input.
  • 3.

    Insert the Phono/ Line In adapter into the Analog port.

  • 4.

    Insert the other end of the RCA cable into the back of your turntable.

    Ensure the turntable uses a phono cartridge compatible with Omnia. For more information see the Turntable troubleshooting topic.
  • 5.

    Ensure to ground Omnia to a suitable phono grounding connection.

  • 6.

    Repeatedly press the Inputs button on the remote until the Control Line turns Pink to indicate Analogue as the source of the music.

    You can also select the input by swiping left or right on the Control Line. See the Can I change the input without the remote? topic for more information.

  • 7.

    Press Vol+/Vol- on the top of Omnia or press the +/- button on the remote to adjust the volume.